BELGACOM B-BOX Especificaciones Pagina 1

Belgacom b-box Instructions for use Version 1.0

10

Attach to Your Network Using Ethernet Cabling The LAN ports on the Belgacom b-box auto-negotiates the connection speed to 10 Mbps Ethernet or 100 Mbp

CHAPTER 3 CONFIGURING THE CLIENT PC After completing hardware setup by connecting all your network devices, you need to configure your computer to c

1. Double-click Internet Protocol (TCP/IP). 2. If “Obtain an IP address automatically” and “Obtain DNS server address automatically” are already s

Obtain IP Settings From Your Belgacom b-box Now that you have configured your computer to connect to your Belgacom b-box, it needs to obtain new netw

Manual IP Configuration 1. Follow steps 1-4 in “DHCP IP Configuration” on page 3-3. 2. Select “Use the following IP address automatically.” Enter

• In the Control Panel window, click Network and Internet Connections. • The Network Connections window will open. Locate and double-click the Loc

3-10 Obtain IP Settings from Your Belgacom b-box Now that you have configured your computer to connect to your Belgacom b-box, it needs to obtain n

3. Type “IPCONFIG /RENEW” and press the ENTER key. Verify that your IP Address is now 192.168.1.xxx, your Subnet Mask is 255.255.255.0 and your Defa

TCP/IP Configuration Setting IP Address ____.____.____.____ Subnet Mask ____.____.____.____ Preferred DNS Server ____.____.____.____ Alternate DNS S

TABLE OF CONTENTS CHAPTER 1 INTRODUCTION ...4 About the Belgacom b-box...

 Double-click the Network icon in the Systems Preferences window.  If “Using DHCP Server” is already selected in the Configure field, your co

 In the Internet Explorer Preferences window, under Network, select Proxies.  Uncheck all check boxes and click OK. 21

CHAPTER 4 CONFIGURING THE BELGACOM B-BOX After you have configured TCP/IP on a client computer, use a web browser to configure the Belgacom b-box. T

Note: To ensure proper screen refresh after a command entry, be sure that Internet Explorer 5.0 is configured as follows: Under the menu Tools/Intern

• Telephone Service The telephone service is disabled by default. If you want to enable the Telephone function of the ADSL Wireless Base Station you

2. Phone Number Settings Enter the telephone number, Login and Password supplied by your Internet Service provider. Repeat this for each available por

ADSL ADSL (Asymmetric Digital Subscriber Line) is designed to deliver more bandwidth downstream (from the central office to the customer site) than up

Status The Status screen displays information on connection line status, data rate, operation data and defect indication, and statistics. 27

The following items are included on the ADSL status page: 28

Advanced Setup Clicking the Home icon returns you to the home page. The Main Menu links are used to navigate to other menus that display configuratio

Clone MAC Address... 35 LAN ...

File Allows you to enable or disable file server functionality. Server Tools Contains options to back up and restore the current configuration,

Check “Enable Automatic Time Server Maintenance” to automatically maintain the Belgacom b-box’s system time by synchronizing with a public time server

Note: If you check “Enabled” and specify an IP address of 0.0.0.0, any host can manage the Belgacom b-box. For remote management via WAN IP address

Domain Name Servers are used to map a domain name (e.g., www.somesite.com) to the equivalent numerical IP address (e.g., 64.147.25.20). Your ISP shoul

Protocol Protocol used for the connection. ATM Interface Clicking on the ATM VC brings up the following screen. The Belgacom b-box uses ATM as its

 PPPoE: Point-to-Point over Ethernet is a common connection method used for xDSL.  MAC Encapsulated Routing: If your ADSL service is a Bridged mo

Some ISPs may require that you register your MAC address with them. If this is the case, the MAC address of the Belgacom b-box must be changed manual

Parameter Description LAN IP IP Address The IP address of the Belgacom b-box. IP Subnet Mask The subnet mask of the Belgacom b-box. DHCP Server T

End IP Domain Name Specify the start IP address of the DHCP pool. Do not include the gateway address of the Belgacom b-box in the client address pool

characters. Functioning as an access point, the Gateway can be configured for roaming clients by setting the SSID and wireless channel. See the desc

CHAPTER 1 INTRODUCTION Congratulations on your purchase of the Belgacom b-box. We are proud to provide you with a powerful yet simple communication

Access Control Using the Access Control functionality, you can specify which PCs can wirelessly connect to the access point. Each PC has a unique ide

Filtering Access Rule for When MAC filtering is enabled, all registered MAC addresses registered MAC are controlled by the Access Rule. address MAC

network and management resources available, and the software support provided on wireless clients. A summary of wireless security considerations is l

See the description of the Access Control features below. Parameter Description WEP WEP Mode You can choose disabled, 64-bit or 128-bit encrypt

With TKIP, WPA uses 48-bit initialization vectors, calculates an 8-byte message integrity code, and generates an encryption key periodically. For auth

802.1X Management access will be checked against the authentication database stored on the router. If an authentication RADIUS server is used, you mu

Server Port 1812 UDP port used for RADIUS authentication messages. Re-Authentication 3600 Defines a maximum period of time for which the Period

NAT Settings NAT allows one or more public IP addresses to be shared by multiple internal users. Enter the Public IP address you wish to share into

Address Mapping Use Address Mapping to allow a limited number of public IP addresses to be translated into multiple private IP addresses for use on

Virtual Server Using this feature, you can put PCs with public IPs and PCs with private IPs in the same LAN area. If you configure the Belgacom b-b

Safety Precautions • Do not expose the product to excessive moisture, rain, sand or heat sources. • The product should not be exposed to dripping or s

Special Applications Some applications, such as Internet gaming, videoconferencing, Internet telephony and others, require multiple connections. The

Note: Choosing a row that already contains data will overwrite the current settings. Example: ID Trigger Port Trigger Type Public Port Public T

NAT Mapping Table NAT Mapping Table displays the current NAPT address mappings. The NAT address mappings are listed 20 lines per page, click the con

Gateway Enter the WAN IP address of the gateway to the remote network. Configure Allows you to modify or delete configuration settings. Click Add

Parameter Description General RIP Parameters RIP mode Globally enables or disables RIP. Auto summary If Auto summary is disabled, then RIP packe

not participate in sending route broadcasts. Parameter Description Version Sets the RIP version to use on this interface. Poison Reverse A method

R = RIP (Routing Information Protocol) assigned route. I = ICMP (Internet Control Message Protocol) Redirect route. Network Destination IP address.

Access Control Access Control allows users to define the outgoing traffic permitted or not-permitted through the WAN interface. In the example above

Define the appropriate settings for client PC services (as shown above). Click “OK” to save your settings. The added PC will now appear in the Access

The Belgacom b-box can also limit the access of hosts within the local area network (LAN). The MAC Filtering Table allows the Belgacom b-box to enter

CHAPTER 2 INSTALLATION Before installing the Belgacom b-box, verify that you have all the items listed under “Package Contents.” If any of the items

The Belgacom b-box allows the user to block access to web sites from a particular PC by entering either a full URL address or just a keyword. This fe

Schedule Rule You may filter Internet access for local clients based on rules. Each access control rule may be activated at a scheduled time. Defin

Define the appropriate settings for a schedule rule (as shown on the following screen). The rule in the screen shot above prohibits emailing from 3.00

Network attacks that deny access to a network device are called DoS attacks. DoS attacks are aimed at devices and networks with a connection to the

the stated destination computer has previously requested the current communication. This is a way of ensuring that all communications are initiate

POP3 Server Address Enter your POP3 server address (usually the part of the email address following the “@” sign). User Name Enter your email

sensitive time period Maximum 30 Maximum number of half-open fragmentation half-open packets from the same host. fragmentation packet number from

SNMP Community Use the SNMP configuration screen to display and modify parameters for the Simple Network Management Protocol (SNMP). A computer att

Trap Parameter Description IP Address Community Version Traps are sent to this address when errors or specific events occur on the network. A comm

ADSL ADSL Parameters We recommend leaving the Operation Mode at the default Automatic setting, to automatically negotiate with the remote DSLAM. P

Data passing between devices connected to your local area network can run at up to 100 Mbps over the four Fast Ethernet ports. The Belgacom b-box con

Parameter Description Status Line Status Data Rate Upstream Downstream Operation Data/Defect Indication Noise Margin Upstream: Downstream: Outpu

Loss of Frame Defect Shows the current status of the ADSL line. Actual and maximum upstream data rate. Actual and maximum downstream data rate. Min

Fast Path Header Error Concealment errors. Interleaved Path Header Error Concealment errors. (Superframes represent the highest level of data presen

See the table below for a description of the parameters. Parameter Description Phone 1/2 Enable Enable/disable phone 1 and/or 2. Phone Number Your

SIP, the Session Initiation Protocol, is a signaling protocol for Internet conferencing, telephony, presence, events notification and instant messagi

Registrar Setting Set the registrar settings.  Registrar IP: IP address of SIP registrar.  Registrar Port: Port number of SIP registrar. Telep

1. G.711 A law 2. G.711 U law 3. G.729 4. G.723.3 See the table below for a description of the parameters. Parameter Description Support Call

Telephony Status View the Telephony status for both FXS ports on this page. Click “Refresh” to update this page. This page displays the Port Type,

Dialed Call Number of calls made. Rejected Call Number of rejected calls. Forwarded Call Number of forwarded calls. Maintenance Check Bac

Download the file to your hard drive. Then click Browse... to find the file on your computer. Select the firmware file and click “Open.” Click “SAVE”

Hardware Installation ADSL Connection Connect your ADSL line to this port. Fast Ethernet Connection Connect a PC to one of the RJ-45 ports on the B

Status The Status screen displays WAN/LAN connection status, firmware and hardware version numbers, as well as information on DHCP clients connected

81

The security log may be saved to a file by clicking “SAVE” and choosing a location. The following items are included on the Status screen: Paramete

83

APPENDIX A TROUBLESHOOTING This section describes common problems you may encounter and possible solutions to them. The Belgacom b-box can be easily

Troubleshooting Chart Symptom Action Management Problems Cannot connect using the Web browser • Be sure to have configured the Belgacom b-box w

GLOSSARY 10BASE-T IEEE 802.3 specification for 10 Mbps Ethernet over two pairs of Category 3, 4, or 5 UTP cable. 100BASE-TX IEEE 802.3u specifica

A 100 Mbps network communication system based on Ethernet and the CSMA/CD access method. Full Duplex Transmission method that allows two network dev

transmission medium, facilitating the exchange of data between network nodes. MIB An acronym for Management Information Base. It is a set of databas

SPECIFICATIONS Standards Compliance CE Mark Emissions FCC Class B, VCCI Class B Industry Canada Class B EN55022 (CISPR 22) Class B C-Tick - AS/NZS 35

9

Storage -40 to 70 °C (-40 to 158 °F) Humidity 5% to 95% (non-condensing) 90

Information Hereby, Philips Consumer Electronics, BLC P&ACC, declares that this CIA6726N/BG is in compliance with the essential requirements and